End of Support Announcement


Wed, Oct 26, 2011

Dear Hamar Laser Customers,

Thank you for continuing to use our laser alignment products. We truly appreciate it!

Due to the extreme difficulty sourcing component parts for circuit cards for these products, effective January 1, 2012, Hamar Laser will no longer support the products listed below. The replacement products are listed below as well.

 

Old Part Number -Support Ended

 

Replacement Part Number

1.

A-517 Single Axis Target

A-1519-2.4ZB Single-Axis Wireless Target or A-1520-2.4ZB Single-Axis Wireless Target

2.

A-1518 Single-Axis Target with built-in display

A-1519-2.4ZB Single-Axis Wireless Target or A-1520-2.4ZB Single-Axis Wireless Target

3.

R-307 2-Axis LCD Readout

R-1307C 2-Axis LED Readout, R-1307-2.4ZB 2-Axis LED Readout with Wireless Capability

4.

R-308 Single-Axis LCD Readout

No direct replacement available. If the A-1519-2.4ZB is purchased to replace the A-517, then the R-1355-2.4ZB PDA Readout or the A-910-2.4ZB Wireless Data Receiver for laptops should be ordered to display the target data.

5.

R-307V Large LED 2-Axis Readout

R-1307C 2-Axis LED Readout, R-1307-2.4ZB 2-Axis LED Readout with Wireless Capability

6.

R-308V Large LED Single-Axis Readout

No direct replacement available. If the A-1519-2.4ZB is purchased to replace the A-517, then the R-1355-2.4ZB PDA Readout or the A-910-2.4ZB Wireless Data Receiver for laptops should be ordered to display the target data.

7.

T-251 Scanner Preamp (this was used to convert an R-307 to be used with an A-517)

No replacement available.

8.

R-355C/R-355D Computer Interface

R-358 Computer Interface for 2 or 4 axis targets only. Note: if software has been purchased, then for 2-axis targets order the R-1307-2.4ZB and the A-910-2.4ZB Wireless Data Receiver for laptops to wirelessly down the data into the software.

9.

L-120 PRY Base for L-722 and L-723

L-123 PRY Base.

Please contact Teri Carlisle at sales@hamarlaser.com with any questions you may have.

Leave a Reply



(will not be published)