Hamar Laser’s X-Series™ Brand Manager Terry C. Southall makes the case for reintegrating shaft alignment into preventive maintenance programs Plant Engineering, a leading publication for plant engineers and managers, has published a timely white paper on shaft alignment written by Terry C. Southall, Global Brand and Distribution Manager for Hamar Laser’s X-Series™ Laser Shaft Alignment Systems. Sharing…
Read more »
Showcasing world-renowned laser systems for virtually any alignment challenge The alignment specialists at Hamar Laser Instruments are very excited to be exhibiting once again at IMTS 2024, the world’s largest trade show of its kind. This year IMTS will be held September 9-14 at McCormick Place in Chicago and we will be there, in Booth…
Read more »
Microsoft has ended support for Windows® 7 and 8 operating systems Products affected: Hamar Laser and X-Series™ tablets and other computer hardware with Windows® 7/8 Effective August 1, 2024, Hamar Laser is no longer supporting Hamar Laser and X-Series™ tablets and other computer hardware with Windows® 7/8. Microsoft ended support for Windows 7…
Read more »
We’re replacing our existing PDAs with new higher-performance models We want to share with you this end-of-life information regarding our rugged PDAs, including replacement part numbers for these products, as outlined below. Products affected: R-1357-2.4ZB Rugged PDA Data Display R-1357-2.4XBE Rugged PDA Data Display Effective May 6, 2024, Hamar Laser is discontinuing the R-1357-2.4ZB and…
Read more »
Available now, the FREE upgrade includes significant additions and fixes Do you have the latest Couple6 Software version for your X-Series™ Laser Shaft Alignment System? As part of our continuing process to improve our shaft alignment products, we have just released the latest version of our Couple6 Software. Version 3.9.9.10 is now available for downloading…
Read more »
Fast and highly repeatable geometry laser system greatly reduces calibration time and offers many advantages over conventional methods Hamar Laser Instruments has released its L-703SP Surface Plate Calibration System. The L-703SP is a compact geometry laser-based calibration system that is highly repeatable, offers extremely high resolution and accuracy, easy setup and training, and fast data…
Read more »
Powerful system features “S” variant of compact & versatile new laser; delivers higher accuracy and faster setups, shaving time off alignments Hamar Laser Instruments announces the release of their new L-703S 4-Axis Lathe & Turning-Center Spindle Alignment System. Featuring the “S” variant of Hamar Laser’s compact and versatile next-generation L-703 Laser, the new system is…
Read more »
Affects some Hamar Laser targets, readers, USB receivers and battery packs We want to share with you this end-of-life information that affects some of our targets, readers, USB receivers and battery packs. Please note that we have successfully procured replacements for the end-of-life radio components and batteries in the affected products, and have issued replacement…
Read more »
Compact, versatile & adaptable system streamlines alignment of engine blocks, compressor bores, cylinder bores, shaft bearing bores, stern tubes and more Hamar Laser Instruments, Inc., a world leader in laser alignment, has released its new, upgraded L-703B Self-Centering Bore Alignment System. The new system uses the L-703B Laser variant of Hamar Laser’s compact and extremely…
Read more »
Completely retooled software supports the newest Windows operating systems Supports Hamar’s next-gen 5-axis wireless targets and older spindle and scanning targets Hamar Laser is pleased to announce the release of Lathe10, the company’s new and completely updated software package. S-1408 Lathe10 Alignment Software for Lathes and Turning Centers supports Hamar’s L-700, L-702SP and L-703S spindle…
Read more »
